F Series
Strainers help protect the meter from serious damage by retaining debris released by a new piping, sand and/or dirt contained in the liquid itself. The strainer initial cost is soon paid back by preventing downtime replacement spare parts cost, further to meter damage. A meter strainer installed on the inlet side is always recommended as a first strainer upstream of the pump could not be enough. Strainers shall not be mixed up with cartridge filters, as they only operate a sieving action for meter protection and not a liquid purging action. Strainer baskets are available in 40, 80 and 200 mesh and for particular high viscosity applications can be requested also in 20 mesh.
F7 Strainer:
Suitable for SM5, SM7, M5, M7 and M10 meters.
• 2″ 350 PSI (25 bar). Aluminum, meant to light fuels, jet fuel and industrial liquids. Supplied with cover or without cover when an air eliminator is used.
• 2″ 150 PSI (10 bar), Stainless steel, meant to acid pH liquids. Easily adapted for air eliminator mounting when required.
F15 Strainer:
Suitable for SM15, M15 and M25 meters.
• 3″ 350 PSI (25 bar). Aluminum, meant to light fuels, jet fuel and industrial liquids applications. Supplied with cover or without cover when an air eliminator is used.
F30 Strainer:
Suitable for SM30, M30, M40 and M60 meters.
• 4″ 150 PSI (10,5 bar). Aluminum, meant to light fuels, jet fuel and industrial liquids applications. Supplied with cover or without cover when an air eliminator is used.
- Aluminum
- Hard anodized aluminum
- Stainless steel